Installation - Marmitek Megaview60 User Manual

3. CAT5E/CAT6 CABLE REQUIREMENTS
• UTP-, FTP- or STP-cable
• 24AWG or lower
• Solid twisted pair
• 100 ohm at 1MHz
• RJ-45 jack according to EIA/TIA T568B standard
Instead of CAT5e cable, CAT6 cable may also be applied (this offers better quality). Use a
'solid twisted pair CAT-5e or CAT-6 cable' in order to optimise transfer quality.

4. INSTALLATION

HD Settop box
HDMI
Blu-ray player
1
MediaCenter PC
In order to ensure that the system is working properly you are advised to check the set-up
with short CAT-5e/6 cable lengths first.
1. Switch off all appliances before you start connecting.
2. Connect the HDMI source (HD-DVD player, blu-ray disc player, HD set-top box, game
console, etc.) to the MegaView60 transmitter [1], using an HDMI cable (not provided).
3. Connect the MegaView60 receiver to the appliance shown [2] (e.g. HDTV or projector),
using an HDMI cable (not provided).
4. Use two CAT5e/6 Ethernet cables to connect the MegaView60 transmitter with the
MegaView60 receiver [3&4].
*The RJ45 plug on these cables must be connected according to EIA/TIA T568B standard,
see attachment page 27.
Make sure that the CAT5e/6 cable and the transmitter and receiver connections (CAT5e-1
en CAT5e-2) correspond to one another.
5. Connect the power adapter [5] to the 'DC/5V' connection on the MegaView60 receiver
(HDMI Receiver) and plug the adapter into a socket.
5. USAGE
1. Switch on the HDMI source (e.g. HD set-top box or multi media PC).
2. Switch on the display device (for instance HDTV or projector) and select the appropriate
input. Usually you will do this by pressing the A/V or EXT button of your remote control.
3. You will receive images from the connected A/V device immediately.
4
CAT5e-2
3 & 4
HDMI Transmitter
CAT5e-1
HIGH SPEED CAT5e/6 EXTENDER
5
HDMI
HDMI Receiver
2
HIGH SPEED CAT5e/6 EXTENDER
HDTV
© MARMITEK