2. PACKAGE CONTENTS
MegaView 80
1x transmitter (HDMI Transmitter) 1x transmitter (HDMI Transmitter)
1x receiver (HDMI Receiver)
2x Power adapter
1x User manual
3. CAT5e/CAT6 CABLE REQUIREMENTS
x
UTP-, FTP- or STP-cable
x
24AWG or lower
x
Solid twisted pair
x
100 ohm at 1MHz
x
RJ-45 jack according to EIA/TIA T568B standard
Instead of CAT5e cable, CAT6 cable may also be applied (this offers better
quality). Use a 'solid twisted pair CAT-5e or CAT-6 cable' in order to
optimise transfer quality.
4. INSTALLATION
In order to check proper functioning of the system, it is advisable to test the
set-up first, using a short CAT-5e/6 cable.
1.
Switch off all appliances before you start connecting.
2.
Connect the HDMI source (Blu-ray disc player, TV Decoder, Media
Centre PC, etc.) to the MegaView 80/81 transmitter [1], using an HDMI
cable (not provided).
3.
Connect the MegaView 80/81 receiver to the appliance shown [2] (e.g.
HDTV or projector), using an HDMI cable (not provided).
4.
Use one CAT5e/6 Ethernet cable to connect the MegaView 80's
transmitter to the receiver [3].
4
MegaView 81
1x receiver (HDMI Receiver)
1x Infrared receiver
1x Infrared blaster LED
2x Power adapter
1x User manual
© MARMITEK