Connection Method - Sharp IV-08MTV Instruction Manual

[1] To connect the Monitor to an IV-S30 series controller or an IV-C35M
Connect the NTSC video input terminal (VIDEO IN) on the Monitor to the monitor connector on the IV-
S30 series (controller), or the IV-C35M, using the monitor cable (*1).
[Rear view of the IV-08MTV]
*1: The monitor cable is an IV-S30 series and IV-C35M accessory.

6. Connection Method

Video input terminal
ANALOG VIDEO VIDEO
DC 24V
RGB OUT IN
If you need a cable longer than 2 m, purchase one locally.
(VIDEO IN)
Monitor connector
Monitor cable *1
(Cable length: 2 m)
- 10 -
IV-S30 series
IV-C35M