Related Manuals for Sharp InGlass LA Series
Summary of Contents for Sharp InGlass LA Series
- Page 1 SHARP LA SERIES INSTALLATION GUIDELINES PN-LA652 / PN-LA752 / PN-LA862 Sharp NEC Display Solutions Europe GmbH 24-Jun-24...
-
Page 2: Table Of Contents
Precautions for installation and handling …page 8-10 Precautions for display mounting …page 11 • • Temperature, clearance and environment …page 12 • Portrait installation …page 13 Tilted and face-up installation …page 14 • Side-by-side installation …page 15 • Sharp NEC Display Solutions Europe GmbH... -
Page 3: Precautions For Transportation Of The Packed Display
Transport the packed display on a cart. In case cart cannot be used (e.g., stairs), move the display with more than 4 persons. Move the packed display in landscape position. Transporting the display in portrait or flat position is not supported. (Temporary transportation in portrait position in an • elevator for example is allowed.) <Packaging dimensions> Sharp NEC Display Solutions Europe GmbH... - Page 4 1,200mm < width is necessary. space is necessary. Caution: Take care not to hit the package against the corner wall. (In case width of a cart is <300mm and height of cart is < 150mm) Sharp NEC Display Solutions Europe GmbH...
- Page 5 Caution: Take care not to hit the package against the elevator door or the wall white carrying the display into the elevator. Note: The space for the workers who ride together is not included. Sharp NEC Display Solutions Europe GmbH...
- Page 6 Caution: The packing or product should not contact with the door and/or the wall when using an elevator. The following list is indicating angles and required sized when the depth is insufficient and carrying the package diagonally is required. Sharp NEC Display Solutions Europe GmbH...
-
Page 7: Precautions For Opening Package
In case dew condensation occurs not only on the surface but internally, please do not turn on the display until the condensation disappears. Otherwise, it may cause malfunction. (Please raise the ambient temperature gradually in order to avoid dew condensation.) Sharp NEC Display Solutions Europe GmbH... -
Page 8: Precautions For Installation And Handling
When the display is temporary put on the desk etc without a stand, please spread a soft sheet under it because the mounting bracket interfere with the desk. Note: Please refer to “Mounting precautions (for SHARP dealers and service engineers)” which is described in the operation manual and “Mounting precautions (For SHARP dealers and service •... - Page 9 Screw the eyebolts into eyebolt holes in eyebolt brackets as shown in the picture. • Be sure the eyebolts are secure. Do not mount the monitor using only the eyebolts. Eyebolts are for temporary use only. • Sharp NEC Display Solutions Europe GmbH...
- Page 10 • • Please check the position and assignment for each worker by referring to the illustration below. 86 inch / 75 inch 65 inch Caution: Please be careful not to touch the speakers. Sharp NEC Display Solutions Europe GmbH...
-
Page 11: Precautions For Display Mounting
Please tighten the screws to approximately 3Nm torque. ※ Do not use an impact driver. Please mount the displays onto the mounting bracket recommended by SHARP. Read carefully the notes described in the instruction manual of each option. Sharp NEC Display Solutions Europe GmbH... - Page 12 When using the monitor laying flat on a surface (when the monitor is tilted more than 20 degrees upward from the perpendicular in relation to a level surface), consult an authorized SHARP/NEC dealer because there are some specific mounting conditions. Adhere to the following. Failing to adhere to the following may cause malfunctions.
-
Page 13: Portrait Installation
When clamping the power cord, take care not to stress the terminal of the power cord. • Do not bend the power cord excessively. Set the “PORTRAIT/LANDSCAPE INSTALL” on the ADMIN menu to “PORTRAIT”. • Use the cover SHARP logo when you install the monitor in portrait orientation. • Sharp NEC Display Solutions Europe GmbH... -
Page 14: Tilted And Face-Up Installation
‒ Need special face-up supporting bracket for 75 inch and 86 inch: FACE-UP BRACKET PN-LA752 (100016245) FACE-UP BRACKET PN-LA862 (100016246) ‒ Unable to use PIP mode of 4 screens in case of tilted 90 degrees Sharp NEC Display Solutions Europe GmbH... -
Page 15: Side-By-Side Installation
MULTIPLE DISPLAY MODE in the OSD setting menu: • Please set to “ON” when two or more monitors are used in close proximity. Supports up to 170° when facing inwards to each other in side-by-side conditions. Sharp NEC Display Solutions Europe GmbH... - Page 16 Sharp NEC Display Solutions Europe GmbH...
Need help?
Do you have a question about the InGlass LA Series and is the answer not in the manual?
Questions and answers