Sharp IV-08MTV Instruction Manual page 18

Lcd color monitor
Table of Contents

Advertisement

(2) Performance specifications
Item
Display size
Display type
Driving system
Number of pixels
Display color
Screen brightness
Backlight working life
Number of pixels
Signal system *3
Image input connector
Image output connector
Fine adjustment
function (Display
language selectable:
Japanese/English)
*1: The life span is determined when the ambient temperature is held at 25 ±5
remains above 50% of the default value (or the backlight does not flicker).
*2: When connecting the Monitor to a personal computer with screen resolution greater than 800 x 600
pixels (such as 1024 x 786), a "NOT supported" message will appear. Before connecting the
personal computer, change the screen resolution on the personal computer to "800 x 600."
*3: The input signal selection can be changed on the adjustment screen.
If you want the Monitor to connect equipment made by other manufacturers, check the compatibility
using the actual equipment.
Specifications
8.4 inches diagonal: 170.4 W x 127.8 H mm
Transmissive type TFT liquid crystal panel
TFT active matrix driving system
921,600 pixels: (640 W x 480 H) x 3, Ratio of functional pixels: 99.99%
or better
Approximately 262,000 colors
230 cd/m
2
20,000 hours on average *1
800 x 600 pixels *2
NTSC, analog RGB (when connected to an IV-S51M)
RCA connector (1 channel), D-sub 15 pin (1 channel)
RCA connector (1 channel)
- When inputting an NTSC video
signal:
SATURATION, HUB, MODEL
SELECT
- When inputting an ANALOG RGB
signal:
AUTO SETUP (position, color
etc.), CLOCK, PHASE, SUB
PIXEL.
- 17 -
- Common to NTSC VIDEO INPUT
and ANALOG RGB INPUT:
BRIGHTNESS, CONTRAST,
BACKLIGHT, SHARPNESS,
QUALITY, horizontal/vertical
position adjustment, position of
the adjustment display screen,
OSD TIMER, OSD TRANS-
PARENCY, change default
setting between NTSC VIDEO /
ANALOG RGB, RECALL.
o
C and the brightness

Advertisement

Table of Contents
loading

Table of Contents