Sharp IV-08MTV Instruction Manual page 14

[4] To connect two IV-08MTV monitors
Connect the NTSC video output terminal (VIDEO OUT) on the IV-08MTV to the NTSC video input
terminal (VIDEO IN) on another IV-08MTV using a standard video cable (available locally: less than 10
m). Then, you can monitor simultaneously at another location.
The video output and video input terminals are RCA connectors.
IV-08MTV
[Simultaneous monitoring at another location]
IV-08MTV
Video output terminal
(VIDEO OUT)
ANALOG VIDEO VIDEO ANALOG VIDEO VIDEO
DC 24V DC 24V
RGB OUT IN RGB OUT IN
Video input terminal
Video cable
IV-S30 series or others
(VIDEO IN)
(available locally: less than 10 m)
- 13 -