Elo TouchSystems ET3201L User Manual page 17

Parameter
Video Settings, Audio Settings, Color Settings and Other Settings can be selected
Main Menu
Video Source, Brightness, Contrast, Black Level, Sharpness and Aspect Ratio are
Video Menu
available in this menu.
Video Source Allows the user to switch between the available video sources.
Allows the user to toggle the mute setting. Also, the volume of the internal speakers or
headphones can be adjusted.
Audio Menu
Default: Not Muted, Volume at 50
Displays the Color Adjust and Color Preference Menus
Color Menu
Allows HDMI video to be displayed on the monitor
HDMI
Allows VGA video to be displayed on the monitor
VGA Port
Allows DisplayPort video to be displayed on the monitor
DisplayPort
ECM DP – DisplayPort is the standard video output of Elo Computer modules. If
Elo Computer
HDMI video input is found, the video source can be switched.
Module
The monitor continually scans for active video from VGA, DisplayPort, HDMI, and the
Computer Module. This adjustment selects which of those input ports should be
displayed.
Video Source
If an Elo Computer Module or Intel OPS computer module has been detected, video
priority is given to the computer module before any of the external sources.
Increase/decrease monitor brightness.
Brightness
Default: 65
Increase/decrease monitor contrast.
Contrast
Default: 50
Allows user to change the H. position, V. position, Clock and Phase.
VGA Settings
If VGA is selected, the Auto-Adjust feature is available.
Adjusts sharpness of the displayed images.
Default: no sharpness adjustment
Sharpness
Sharpness function is disabled when the input source ratio is the same as the panels
native ratio
Available Adjustment
User Manual: Interactive Digital Signage
SW601990 Rev E, Page 17 of 36