Elo TouchSystems ET3201L User Manual page 11

32/42/55/70” interactive digital signage touchmonitor

Hide thumbs Also See for ET3201L:

Table of Contents

Rear VESA Mount

For the 32" and 42" models:

A four-hole, 400x400mm mounting pattern is provided on the rear of the monitor.

The VESA FDMI-compliant mounting is coded: VESA MOUNT PER MIS-F, 400,400,6MM

For the 55" models:

A four-hole, 600x600mm mounting pattern is provided on the rear of the monitor.

The VESA FDMI-compliant mounting is coded: VESA MOUNT PER MIS-F, 600,600,6MM

For the 70" models:

A four-hole, 400x400mm mounting pattern is provided on the rear of the monitor.

The VESA FDMI-compliant mounting is coded: VESA MOUNT PER MIS-F, 400,400,8MM

Refer to www.elotouch.com for dimensional drawings.

User Manual: Interactive Digital Signage

SW601990 Rev E, Page 11 of 36

Table of Contents

Et5501l Et4201l Et7001l