8. System Reports
All reports, whether x, z, or any financial, report are freely customizable and programmable
by the user. Therefore, you will be able to include any information you consider essential.
You can call up reports by turning the control lock key into the appropriate lock position,
either X or Z. Upon positioning the key in the right location, the display will show a report
type. You can now use the up/down keys to parse the list of reports on the display.
Selection occurs when you enter the number of the report (shown to its right) followed by
the Subtotal Key to confirm your choice.
Example: Printing Report #5 after having moved the control lock to the X or Z position.
Use the Down Key to move down the list on the display until the report (5) is shown.
Option1: Scrolling
Display Text
( - )
1>Report (5)
CURSOR
SYS
Option2: Entering the Report Number Directly
5
( - )
SYS
Note: The X or Z position merely determines, if the information will remain in storage after
print out. The Z-Report erases the printed data from memory, while the X-Report retains
the data. By pressing the CASH Key instead of the SUBTOTAL Key one can also call up
corresponding User Reports.
8.1 User Report
As a user one can also compose specific reports that include several of the predefined
reports. The type of reports that will appear can be set when programming the cash
register (See Programming Manual). The user can then select this specific report by
entering the User Report Number (also set when programming) followed by the Cash Key
(CR).
Example: Assume the User Report is Report #5. CR usually corresponds with CASH.
5
Cash
CR
40