Cisco UCS 5108 Spec Sheet page 31

For the B22 M3 blade server, supported card adapter combinations are shown in
Table 17 Adapter Card Options
Fabric
Extender Adapter in VIC 1240 Connector Adapter in Mezzanine Connector
Compatibility
2208XP
2208XP VIC 1240
2208XP VIC 1240
2208XP VIC 1240
2208XP None
2204XP
2204XP VIC 1240
2204XP VIC 1240
2204XP VIC 1240
2204XP None
2104XP
2104XP VIC 1240
Notes . . .
1. Cisco-designed adapters are capable of port channeling. A port channel bundles up to four individual
interfaces into a group to provide increased bandwidth and redundancy. Port channeling also load balances
traffic across these physical interfaces. The port channel stays operational as long as at least one physical
interface within the port channel is operational. Cisco-certified adapters suppled by third-party vendors do
not support port channeling. Port channeling is indicated with an oval drawn around several individual ports.
2. Cisco-certified mezzanine adapters are manufactured by third-party vendors and are certified by Cisco for use
in the servers. For more information about supported Cisco-certified mezzanine adapters, see
http://www.cisco.com/en/US/docs/unified_computing/ucs/hw/chassis/install/blade.html#wp1010426
3. The 2104XP fabric extender is not compatible with any I/O card installed in the mezzanine connector.
Cisco UCS 5108 Blade Server Chassis
None
VIC 1280
Cisco-certified mezzanine adapter
Cisco-certified mezzanine adapter
None
VIC 1280
Cisco-certified mezzanine adapter
Cisco-certified mezzanine adapter
None 3
SUPPLEMENTAL MATERIAL
Table 17.
1
Ports
4 x 10 Gb
8 x 10 Gb
6 x 10 Gb
2
2 x 10 Gb
2 x 10 Gb
4 x 10 Gb
4 x 10 Gb
2 x 10 Gb
2 x 10 Gb
31