Cisco UCS 5108 Spec Sheet page 28

SUPPLEMENTAL MATERIAL
Table 16 Adapter Card Options (continued)
Fabric
Extender Adapter in Slot 0
Compatibility
2104XP Cisco-certified mezzanine adapter
Notes . . .
1. Cisco-designed adapters are capable of port channeling. A port channel bundles up to four individual interfaces
into a group to provide increased bandwidth and redundancy. Port channeling also load balances traffic across
these physical interfaces. The port channel stays operational as long as at least one physical interface within
the port channel is operational. Cisco-certified adapters suppled by third-party vendors do not support port
channeling. Port channeling is indicated with an oval drawn around several individual ports.
2. Cisco-certified mezzanine adapters are manufactured by third-party vendors and are certified by Cisco for use
in the servers. For more information about supported Cisco-certified mezzanine adapters, see
http://www.cisco.com/en/US/docs/unified_computing/ucs/hw/chassis/install/blade.html#wp1010426
3. Available only on M2 and M3 servers (not available on M1 servers)
The general connectivity diagrams between the adapter cards and the different fabric extenders are shown
in Figure 13 on page 28
Figure 13 B250/B440 M1/M2 to 2208XP Fabric Extenders
28
through Figure 15 on page
Adapter in Slot 1
Cisco-certified mezzanine adapter
29.
Cisco UCS 5108 Blade Server Chassis
Ports 1
2 x 10 Gb