Cisco 7916 Phone Manual page 8

Unified ip phone expansion module
Hide thumbs Also See for 7916:
Table of Contents

Advertisement

Figure 2
Removing the Footstand
Unplug the Cisco Unified IP Phone network and power
Step 1
connections.
Unplug the handset, and unplug the headset if one is
Step 2
attached to the phone.
Turn the Cisco Unified IP Phone over and lay it on a
Step 3
protected flat surface to prevent it from being
scratched.
Locate the two foot pins on the footstand.
Step 4
Use a flat head screwdriver to carefully push on one of
Step 5
the foot pins to release it. Then carefully push on the
other foot pin to release it.
Note
Lift off the footstand and store it separately.
Step 6
8
You may have to lift and hold the
Cisco Unified IP Phone to support it when
pushing the foot pins. When pushing on the
footpins, push away from your body.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents