Table of Contents
Advertisement
Establishing Router Connections
Running Telnet
Page 68
MAC addresses are listed on a small label on the chassis. The MAC address also
displays in the
show router arp
The 7210 SAS-E must have a management IP address. The IP address is manually
configured.
Once the IP parameters are configured, you can access the CLI command line with a
Telnet connection. To establish a Telnet connection, run a Telnet program and issue the
Telnet command, followed by the IP address:
The following displays an example of a Telnet login:
C:\>telnet 10.10.10.25
Login: admin
Password: ########
ALA-1#
command output.
7210 SAS-E Installation Guide
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
