Default Settings - Alcatel-Lucent 7210 Installation Manual

Initializing the System and Downloading Software
Page 54
Board Serial Number is 'SN12345678'
Bootlog started for Version V-1.0.R1
Build V-1.0.R1 bootrom/mpc 7xxx
Built on Thu Jan 15 14:55:59 IST 2009 by builder in /builder/ws/panos/main
...
Since the router does not ship with a BOF, it will show the default settings.
Looking for cf1:/bof.cfg ... not found
Could not find bof.cfg on any of the local drives.

Default Settings:

--------------------------------------------------------------------------
-----------------------
Contents of Boot Options File on cf1:
#eth-mgmt Port Settings:
eth-mgmt-disabled
#uplinkA Port Settings:
uplinkA-port
uplinkA-address
uplinkA-vlan
#uplinkB Port Settings:
uplinkB-port
uplinkB-address
uplinkB-vlan
#System Settings:
wait
persist
console-speed
Hit a key within 2 seconds to change boot parameters...
Press any key.
Enter password to edit the Boot Options File
Or CTRL-D to exit the prompt
Password:
The default password is password.
You must supply some required Boot Options. At any prompt, you can type:
"restart" - restart the query mode.
"reboot" - reboot.
"exit" - boot with with existing values.
1/1/1
0
0
1/1/2
0
0
3
off
115200
7210 SAS-E Installation Guide