Installing Your Switch
Installing Your Switch
Rack Mounting
Page 34
If you plan to rack-mount your switch, make sure you have the following equipment
available:
•
Four mounting screws for each device you plan to install in a rack (not
included)
•
A screwdriver (Phillips or flathead, depending on the type of screws used)
To rack-mount your 7210 SAS E:
Step 1
Attach the brackets to the device using the screws provided in the Bracket
Mounting Kit. See
Figure 8: Attaching the Brackets
Mount the 7210 SAS E in the rack, using four rack-mounting screws (not
Step 2
provided). See
Figure
8.
Figure
9.
7210 SAS-E Installation Guide