Connections and Cabling
Connections and Cabling
Once your switch is properly installed, you should connect all network and management cables required for
your network applications. Connections may include:
DB9-to-RJ-45 cable to the console connector
•
Cables to 10/100/1000 Ethernet or SFP ports
•
Note. For additional information on cabling connections, refer to the OmniSwitch AOS Release 6 Switch
Management Guide.
Serial Connection to the Console Port
The console port provides a serial connection to the switch using a USB connector and is required when
logging into the switch for the first time. By default, this connector provides a DCE console connection.
Serial Connection Default Settings
baud rate
parity
data bits (word size)
stop bits
For information on modifying these settings, refer to the Switch Management Guide.
page 2-6
9600
none
8
1
OmniSwitch 6350 Hardware Users Guide
Getting Started
April 2017