Table of Contents
Advertisement
10.
4-pin power connector (4-pin PWR3)
This 4-pin connector provides 5V to an installed SATA DOM (Disk on Module). You can also use
this 4-pin connector to connect to the PSU to increase power by 12V.
11.
ATX power connectors (24-pin EATXPWR1, 8-pin EATX12V1)
These connectors are for the ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
•
•
•
•
4-16
Do not forget to connect the 24-pin and 8-pin power plugs or the system will not boot
up.
Use of a power supply unit (PSU) with a higher power output is recommended when
configuring a system with more power-consuming devices. The system may become
unstable or may not boot up if power is inadequate.
This motherboard supports ATX2.0 PSU or later version.
Ensure that your PSU can provide at least the minimum power required by your
system.
Chapter 4: Motherboard information
Advertisement
Table of Contents
