1.d Remove the ODD as shown and
set aside.
2.
Release the four screws that secures
the HDD drive tray to the chassis.
Set aside for later use.
3.
Remove the HDD drive tray.
4.
Get a 3.5-inch Serial ATA HDD and
the set of bundled screws.
5.
Orient the 3.5-inch SATA HDD in
such a way that the SATA and power
connector are exposed.
Secure the 3.5-inch Serial ATA HDD
to the HDD drive tray using the
bundled set of screws as shown.
6.
Connect a SATA signal cable and a
power cable from the power supply to
the 3.5-inch SATA HDD.
Use an L-type SATA connector to
connect the 3.5-inch SATA HDD to
the motherboard.
ASUS RS100-E8-PI2
2-19