Asus RS100-E8-PI2 User Manual page 34

8. Repeat step 6 - 7 to install the other
2.5-inch SSD.
9. Prepare the SATA power cable and
the SATA signal cable bundled with
the SSD drive tray.
10. Get a SATA power cable and connect
it to the 2.5-inch SSD as shown.
Use the SATA power cable that
comes with the SSD drive tray as
an add-on accessory.
11. Get a SATA signal cable and connect
it to the 2.5-inch SSD as shown.
12. Connect the other end of the SATA
signal cable to the SATA connector on
the motherboard.
Use the SATA signal cable that
comes with the SSD drive tray as
an add-on accessory.
13. Connect the 4-pin power connector
of the power cable to the 4-pin power
connector from the power supply.
2-16
SSD drive tray
2.5-inch SSD
SATA power cable
4-pin power connector
Chapter 2: Hardware setup
SATA signal cable
from the SSD power cable
from the power supply