Onboard Leds - Asus RS100-E8-PI2 User Manual

4.2

Onboard LEDs

1. Standby Power LED (SB_PWR1)
The motherboard comes with a standby power LED. The green LED lights up to indicate
that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should
shut down the system and unplug the power cable before removing or plugging in any
motherboard component. The illustration below shows the location of the onboard LED.
2. +5V Power LED (+5V_LED1)
This LED lights up when the Power-on button is pressed and the system is on.
3 Locator LED (LOCLED1)
The Locator LED is a user-activated LED on the front of the server module that can be
remotely turned on or off. It is used to find a specific server module within a chassis.
ASUS RS100-E8-PI2 4-5