Table of Contents
Advertisement
5.
Close the load plate (A), ensuring that
the front edge of the load plate slides
under the retention lock (B) then push
down the load lever (C).
6.
Insert the load lever under the retention tab to remove the PnP cap from the CPU
socket.
7.
Apply some Thermal Interface Material
to the exposed area of the CPU that
the heatsink will come in contact with,
ensuring that it is evenly spread in a thin
layer.
If the heatsink comes with pre-applied
Thermal Interface Material skip this
step.
The Thermal Interface Material is
toxic and inedible. DO NOT eat it. If
it gets into your eyes or touches your
skin, wash it off immediately and seek
professional medical help.
ASUS RS100-E8-PI2
Load lever
Load lever
Retention tab
Retention
lock
2-7
Advertisement
Table of Contents
