Table of Contents
Advertisement
5.
Platform Enviromental Control Interface Setting (3-pin PECI1)
When ASMB7-iKVM is installed, set to pins 2-3 for correct sensor information of the
Platform Environmental Control Interface (PECI). Set to pins 1-2 if ASMB7-iKVM is not
installed.
6.
ME firmware force recovery setting (3-pin ME_RCVR1)
This jumper allows you to force Intel Management Engine (ME) boot from recovery
mode when ME become corrupted.
7.
VGA connector (16-1 pin VGA_HDR1)
This connector supports VGA High Dynamic-Range interface HDR1.
ASUS RS100-E8-PI2
4-9
Advertisement
Table of Contents
