Table of Contents
Advertisement
Low Latency ASIO operation under Windows 2000/XP on single CPU systems:
To use ASIO at lowest latencies under Windows 2000/XP even when only having one CPU,
the system performance has to be optimized for background tasks. Go to Control
Panel/System/Advanced/Performance Options. Change the default 'Applications' to
'Background tasks'. The lowest usable latency will drop from 23 ms to around 3 ms. This is
no issue when using dual CPU systems.
17.2 Installation
More information on installation problems (which fortunately are very seldom, thanks to Plug
and Play), can be found in the Tech Info 'Installation problems'. It is located in the directory
\rmeaudio.web\techinfo on the RME Driver CD.
Hammerfall DSP is normally found in the Device Manager (>Settings/Control Panel/System<),
category 'Sound-, Video- and Gamecontroller'. A double click on ' Hammerfall DSP ' starts the
properties dialog. Choosing 'Resources' shows Interrupt and Memory Range.
The newest information on hardware problems can always be found on our website
audio.com, section FAQ, Hardware Alert: about incompatible hardware.
The dialog 'New hardware component found' does not appear:
Check whether the CardBus card is completely inserted into the PCMCIA slot, or the PCI
interface is correctly inserted in the PCI slot.
The card and drivers have been installed correctly, but playback does not work:
Check whether the Hammerfall DSP appears in the Device Manager. If the ' Hammerfall
DSP' device has a yellow exclamation mark, then there is an address or interrupt conflict.
Even if there is no yellow exclamation mark, it is worth checking the 'Resources' tab
anyway.
Check whether the Hammerfall DSP has been selected as current ASIO device.
The computer crashes whenever the Hammerfall DSP is accessed:
If your graphics board is an older Matrox Mystique or uses a '968' S3 chip, there could be a
memory allocation error. Change the memory area allocated to the Hammerfall DSP via
/Resources/Change Setting. Detailed information on this subject can be found in
\rmeaudio.web\techinfo\install.htm on the RME Driver CD.
User's Guide HDSP System Multiface © RME
www.rme-
34
Advertisement
Table of Contents
