Table of Contents
Advertisement
15.8 Monitor
The Monitor section of the Quick Access Panel is only valid for our Windows MME driver, i.e.
when using programs like WaveLab, Soundforge, Sonar or Samplitude.
Monitor offers two advanced automated monitoring solutions. Monitoring will be controlled
either
by
special
(Samplitude/Sequoia/SAWStudio, mode ZLM), or by the recording state itself (mode
Mix/Replace).
The basic method used is as simple as it is clever: ZLM and record are controlling the Mute
buttons of the corresponding channels. For this to work, Mute must be activated on the
record's Input channel. The fader must not be set to m.a..
A click on Load Def. will load a template (preset4.mix), which can
be used to verify and test this functionality. But it is also possible to
use any other mixer state, as long as the recording channels are
muted manually.
As soon as a recording starts, the corresponding channels will be
unmuted, i.e. the input signal will be processed according to the
current mixer settings. TotalMix lets you check the whole process
visually, as the Mute buttons in TotalMix will be switched on and
off automatically.
In Mix mode the input signal will be mixed on the outputs when
record is active. In Replace mode the Mute button of the
corresponding playback channel will be activated, so that the input
signal replaces the playback signal.
ZLM is a special function for tape machine style monitoring when
doing punch-ins and outs. For this to work the option 'Hardware
monitoring
during
Samplitude/Sequoia. Then at each punch-in the corresponding
Mute buttons will be deactivated, at punch-out they will be re-
activated.
All settings can be changed and configured in real-time.
commands
directly
punch'
has
to
User's Guide HDSP System Multiface © RME
from
the
be
activated
in
recording
software
30
Advertisement
Table of Contents
