Table of Contents
Advertisement
Multi-Connector Cable
The supplied multi-connector cable is required in order to maintain the camera's IP rating.
Connect the multi-connector cable to the camera's multi-connector and to the connectors in the
supplied media converter switch, see page 10.
The cable provides the following signals:
• DC power
• Network (Ethernet 10/100Base-T)
• Input/Output (I/O)
Function
Pin – wire
Configurable
2 – blue
(Input or
7 – yellow
Output)
RX+
3 – green/white
4 – green
RX-
TX+
5 – orange/white
6 – orange
TX-
GND
8 – black
12 V power
1, 9 – red
Media Converter Switch Connectors
For specifications, see page 16.
Notes
Digital input – Connect to GND
to activate, or leave floating
(unconnected) to deactivate.
Digital output – Internal connection
to ground when activated, floating
(unconnected) when deactivated.
If used with an external relay, a
diode must be connected in parallel
with the load, for protection against
voltage transients.
Ethernet – receiving
Ethernet – receiving
Ethernet – transmitting
Ethernet – transmitting
Ground
Used to power camera
14
AXIS Q60-S Series
Specifications
0 to +30 V DC
Max load =
100 mA
Max voltage =
+30 V DC
12–13.2 V DC
Max load = 6 A
Advertisement
Table of Contents
