Panasonic WJ-ND300 Setup Instructions page 68

Network disk recorder

Hide thumbs Also See for WJ-ND300:

Table of Contents

Perform the settings for the time adjustment of a network [NTP Setup]

Screenshot 1

Click the [Comm] button in the setup menu (Advanced)

and then click "NTP Setup" to display the "NTP Setup"

window.

Step 1

Perform the settings for the following items.

I Time Adjustment

Select ON or OFF to determine whether or not to adjust

the time according to the NTP server.

I NTP Server Address

Enter the NTP server address when adjusting the time

using the NTP server. Enter up to 255 alphanumeric

characters including hyphens (-) and periods (.).

I Refresh Interval

Select an interval of time inquiry to the NTP server from

the following.

1 h/2 h/6 h/12 h/24 h

Step 2

Click the [SET] button after completing the settings.

Notes:

• The clock will be adjusted using the NTP server

when the clock of the unit becomes inaccurate

beyond ±5 seconds.

• The clock will not be adjusted when event recording

is being performed on any camera channel or when

emergency recording is being performed.

Table of Contents