Panasonic WJ-ND300 Setup Instructions page 10

Screenshot 2
The IP address setup display will be displayed.
Screenshot 3
The DHCP Setup window will be displayed.
Screenshot 4
The setup item display for each item will be displayed.
10
Step 2
Click the [SET] button.
Step 3
Select the desired network port by pressing the arrows
button (A or B).
PT#1: Camera port
PT#2: Client PC port
PT#3: Maintenance port
Step 4
Display the desired settings item by pressing the arrows
button (C or D).
Step 5
After confirming that the cursor is positioned on "l",
press the [Set] button, and move the cursor to the num-
ber area.
Step 6
Set the value as follows. The cursor appears as a "_"
(underscore).
To move the cursor: Press the arrows button (A) or
(B).
To input values: Press the arrows button (C) or (D).
Step 7
After setting the value, press the "ESC" button to move
the cursor on "l" and finalize the setting.
Step 8
To set the next item, press the arrows button (C) or (D)
to change the menu screen.
Step 9
Repeat steps 5 – 7 to set other items.