Panasonic WJ-ND300 Setup Instructions page 38

Setup menu
Maintenance
Product Information
Disk Information
Partition Information
Network Information
Disk End Mode
HDD Capacity Warning
Data Delete
Save/Load
Config
38
Description
Versions of the software, the hardware (this unit) , MAC address,
temperature inside the unit and software version of the connect-
ed extension unit will be displayed.
Hard disk information such as available capacity of the built-in
hard disk or an extension unit will be displayed.
Available disk space size of the normal area, the event area, the
copy area and the pre-recording areas will be displayed.
Network information such as IP addresses of the connected
devices, network line speed, the current settings for "NW BAND-
WIDTH CONTROL", the maximum transmission rate, etc. will be
displayed.
Perform the settings for action when running out of hard disk
space.
If the available hard disk capacity reaches a specified level, a
warning will be displayed.
Data on the hard disk/external recording device will be deleted.
Contents of settings for this unit will be saved or loaded.
It is possible to check the status of each recording area on the
hard disk drive, and to perform the settings of the hard disk dri-
ves including the initialization (formatting).
Page
80
81
82
83
84
84
85
86
88