Panasonic WJ-ND300 Setup Instructions page 50

Network disk recorder

Hide thumbs Also See for WJ-ND300:

Table of Contents

Perform the settings for site alarm [Site Alarm Setup]

Perform the settings relating to the site alarm such as the setting to validate or invalidate the original alarm from

cameras, the port number used for receiving the original alarm, and the event actions for each camera channel at an

original alarm occurrence.

Screenshot 1

Click "Event" on the setup menu (Advanced) and then

click "Site Alarm Setup" to display the "Site Alarm

Setup" window.

Step 1

Perform the settings for each item.

I Site Alarm

Select "ON" or "OFF" whether to validate or invalidate

the site alarm.

ON: Validates the site alarm.

OFF: Invalidates the site alarm.

I Port Number (from Camera)

Designate the port number to be used for receiving the

site alarm.

I Site Alarm Setup

Perform the settings for the following items for each

camera channel.

[REC CAM]

Performs the settings for a camera channel currently

used for recording.

[PRESET]

Select the preset position (--, 1-16) to which the camera

will move at an alarm occurrence.

When "--" is selected, the camera will not move to the

preset position.

[Output Terminal]

Select the output terminal (--, TRM1-TRM16) that out-

puts alarm signals at an alarm occurrence. When "--" is

selected, alarm signals will not be output.

Step 2

Click the [SET] button after completing the settings.

Table of Contents