Panasonic WJ-ND300 Setup Instructions page 60

Settings of the sequential display of images from cameras [Sequence Setup]
Perform the settings for the sequential display of live images.
Screenshot 1
Click the [Camera] button in the setup menu (Advanced)
and then click the [Sequence Setup] button to display
the "Sequence Setup" window.
Setup items
[The Method of Sequence]
Select "SPOT" or "4 Screens" for "The Method of
Sequence".
[SPOT] [4 Screens]
When the [SETUP] button for the selected method is
clicked the following window will be displayed. Perform
the settings on this window. Click the [SET] button after
completing the settings, and close the window by click-
ing the [×] button at the top right of the window.
60
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after completing the settings.
[CAM]
Select a camera image to be displayed at each step
from the following.
- -: Skips the selected step.
CAM1 - 32: Displays an image from the selected cam-
era channel on a single screen (SPOT).
4A - 4H: Images of the camera group (A-H) consisted
from 4 camera channels in advance will be switched
and displayed sequentially on a 4-Screen.
The camera group settings can be performed on the
"Monitor Display" settings of the setup menu
("Advanced" – "System" – "Basic Setup" – "Monitor
Display"). Refer to page 41 for further information.