Panasonic WJ-ND300 Setup Instructions page 59

Setup items
[MODEL/COMPRESSION]
Select the model of the camera and the image compres-
sion method.
[ADDRESS]
Enter an IP address. Enter up to 255 alphanumeric
characters.
[Port Number]
Set the HTTP port number to be used for the camera. A
number from 1 - 65535 is available.
[GROUP]
Select the desired group (G1-G8) to which the camera
is to be belonged.
[CAM TITLE]
Set the camera title displayed on the [Cam Select] tab,
etc. Enter up to 16 alphanumeric characters.
[USER ID]
Set the user ID to be used to access and log in the cam-
era. Enter up to 32 alphanumeric characters.
Settings of the title of the camera group [Group Setup]
Set the title of the camera group.
Screenshot 1
Click the [Camera] button in the setup menu (Advanced)
and then click "Group Setup" to display the "Group
Setup" window.
[Password]
Set the password to be used to access and log in the
camera. Enter up to 32 alphanumeric characters.
[TIME ZONE]
Displays the time zone of the camera.
[CAM SETUP]
It is possible to display the camera setup menu by click-
ing the [SETUP] button of the desired camera. Refer to
the operating instructions of the camera in use for
descriptions of how to perform the camera settings.
Important:
• The camera setup menu can be displayed only
when "ON" is selected for "Port Forwarding"
("Advanced" – "Comm" – "Basic Setup" – "Port
Forwarding").
• Depending on the network environment, some of the
camera settings menu may not be displayed.
Step 1
Displays the group title of the camera. Enter up to 16
alphanumeric characters.
The available characters are the same characters avail-
able for the camera title.
Step 2
Click the [SET] button after completing the settings.
59