Panasonic WJ-ND300 Setup Instructions page 49

Network disk recorder

Hide thumbs Also See for WJ-ND300:

Table of Contents

Settings relating to the terminal alarm [Terminal Setup]

Set event actions at a terminal alarm occurrence for each camera channel.

Screenshot 1

Click the [Event] button in the setup menu (Advanced)

and then click "Terminal Setup" to display the "Terminal

Setup" window.

Step 1

Perform the settings for the following items for each

camera channel.

[REC CAM]

Performs the settings for a camera channel currently

used for recording.

[PRESET]

Select the preset position (--, 1-16) to which the camera

will move at a terminal alarm occurrence for each termi-

nal.

When "--" is selected, the camera will not move to the

preset position.

[Output Terminal]

Select the output terminal (--, TRM1-TRM16) that out-

puts alarm signals at a terminal alarm occurrence.

When "--" is selected, alarm signals will not be output.

Step 2

Click the [SET] button after completing the settings.

Table of Contents