Clarke Pioneer 205 Operating & Maintenance Instructions

Clarke Pioneer 205 Operating & Maintenance Instructions

Advertisement

Quick Links

PIONEER 205
PIONEER 205
OPERATING & MAINTENANCE
INSTRUCTIONS
0503

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pioneer 205 and is the answer not in the manual?

Questions and answers

Summary of Contents for Clarke Pioneer 205

  • Page 1 PIONEER 205 PIONEER 205 OPERATING & MAINTENANCE INSTRUCTIONS 0503...
  • Page 2 SPARES AND SERVICING SPARES AND SERVICING PARTS & SERVICE TEL: 020 8988 7400 PARTS & SERVICE TEL: 020 8988 7400 PARTS & SERVICE FAX: 020 8558 3622 PARTS & SERVICE FAX: 020 8558 3622 e-mail as follows: e-mail as follows: PARTS: Parts@clarkeinternational.com PARTS: Parts@clarkeinternational.com SERVICE:...
  • Page 3 PARTS LIST GUARANTEE CONTENTS Page...
  • Page 4: Safety Precautions

    SAFETY PRECAUTIONS COMPRESSOR WARNING As with all machinery, there are certain hazards involved with their operation and use. Exercising respect and caution will considerably lessen the risk of personal injury. However, if normal safety precautions are overlooked, or ignored, personal injury to the operator, or damage to property may result. It is in your own interest to read and pay attention to the following rules:...
  • Page 5: Electrical Connections

    ELECTRICAL CONNECTIONS PIONEER 205 WARNING! THIS APPLIANCE MUST BE EARTHED FUSE RATING 020 8988 7400 or e-mail: Service@clarkeinternational.com...
  • Page 6: Preparation For Use

    OPERATION Please note that the details and specifications contained herein, are correct at the time of going to print. However, CLARKE International reserve the right to change specifications at any time without prior notice. Always consult the machine’s data plate NOTE: if you intend using your compressor for spraying, read also the “Helpful...
  • Page 7: Fault Finding

    NOTE: a. If the machine pumps continuously without cutting out then the compressor is too small for the application/tool being used, and damage may result. Consult your Clarke dealer. Fig. 3 b. The motor is protected by a Thermal Overload so that if the motor...
  • Page 8: Shutting Down The Compressor

    SHUTTING DOWN THE COMPRESSOR Fig. 7 Parts List item No. 59 MAINTENANCE A. DAILY Fig. 5 Fig. 8 B. PERIODICALLY WARNING NEVER UNSCREW A CONNECTION WHILST THE AIR RECEIVER IS UNDER PRESSURE. ALWAYS MAKE CERTAIN THAT THE TANK HAS FIRST BEEN EMPTIED. Fig.

Table of Contents