Datavideo DAC-100 Installation Manual page 7

6
EXPORTING TO ( )
1. Connect the S-Video and RCA audio cables from the VCR's Line input to the output on the DAC-100.
2. Connect the FireWire cable to the DAC-100, connect the opposite end to the PC or Mac's FireWire Port.
3. Power on the DAC-100 and the VCR.
4. Start the Editing Software. (Not Supplied)
5. Press the DAC-100's Source Button to switch it to "DV" and the A Encode Button to "16 bit".
6. Go to the "Export" mode on the Editing software to begin exporting video to the VCR.