Datavideo DAC-100 Installation Manual page 6

5
1. Connect the RCA Video/audio cables from the VCR's Line input to the output on the DAC-100.
2. Connect the FireWire cable to the DAC-100, connect the opposite end to the PC or Mac's FireWire Port.
3. Power on the DAC-100 and the VCR.
4. Start the Editing Software. (Not Supplied)
5. Press the DAC-100's Source Button to switch it to "DV" and the A Encode Button to "16 bit".
6. Go to the "Export" mode on the Editing software to begin exporting video to the VCR.
EXPORTING TO
PUSH
Set to "16 bit"
PUSH
Set to "AV"