Specifications - Datavideo DAC-100 Installation Manual

SPECIFICATIONS:

INPUTS
*S-VHS sources
*Composite
*C-Sync
*DV (iLink) Source
OUTPUTS
*S-VHS Source
*Composite Video Source 1.0 Vp-p 75ohm RCA connector
*
Frequency Response
*DG, DP
*Audio Sampling Rate
*DV (iLink) Source
GENERAL
Power (Included)
Ambient Temperature
Ambient Humidity
Dimensions
Accessories (included)
*. All the trademarks are the properties of their respective owners
Y/C in: 4—pin 75 ohm DIN connector
1.0Vp-p 75ohm RCA connector
Composite Sync signal in for Gen-lock
Data Transfer Rate 25Mbps, PAL 4:2:0 / NTSC 4:1:1
Y/C out 4-pin 75ohm DIN connector
4.5 MHz +/- 3 dB
(DV input)
+/- 3%, 3°
12bit 32KHz and 16bit 48KHz option
Data Transfer Rate 25Mbps, PAL 4:2:0 / NTSC 4:1:1
DC 5V / 6.0W AC Adapter
Caution: DAC-100 requires DC 5 Volt +/- 4%,
Use only Datavideo approved Power Adaptor.
32° - 131°F (0° - 55°C)
Less than 90 %
6.15"(W) × 6.0"(D) × 1.6"(H)
156(W) × 150(D) × 40(H) m/m
1.8m IEEE 1394 cable
3R to 3R RCA cable set
S-Video cable
User's manual
Power supply
18