Configuring A Dac-100 With; Avid Dv Xpress 3.5 On Windows Xp - Datavideo DAC-100 Installation Manual

CONFIGURING A DAC-100 WITH

AVID XPRESS DV 3.5 ON WINDOWS XP
Screen 1 above shows a typical desktop in Xpress DV 3.5, key areas for
setup have been highlighted. Please follow the steps below to configure
your DAC-100 for use with Xpress DV 3.5.
Setup Procedure:
Step 1. Connect your DAC-100 to your computer via FireWire.
(IEEE/1394 cable)
Step 2. Turn on your DAC-100 converter.
Step 3. Turn on your Windows computer.
Step 4. Launch the Avid Xpress DV software.
Step 5. Open an existing project or create a new one.
14