Rear Panel Control - Datavideo DAC-100 Installation Manual

REAR PANEL CONNECTION
1 2
Description:
1. Stereo Audio output RCA connectors
2. Composite Video output RCA connector
3. S-Video (Y/C) output connector
4. Mode DIP switch
(Reboot the DAC-100 if you change a DIP Switch)
S1. PAL or NTSC (PAL-ON, NTSC-OFF)
S2. 7.5 IRE / 0 IRE (0 IRE-ON, 7.5 IRE-OFF)
Please note: 0 IRE is most often used in Japan. 7.5 IRE is used elsewhere.
S3. Auto / Manual DV Decode or Encode (Default at Manual Mode)
(*. Manual Mode (S3 -- OFF): select the input video manually, refer to Page 8)
(*. Auto Mode (S3 -- ON) will enable protocol communication with editing system)
S4 & S5 for NTSC and PAL video system
ON
ON S4
S5
ON
OFF S4
OFF
S6. Reserved, set normal OFF.
5.
6-Pin FireWire interface for DV In/Out
6. DC Input Jack (+ 5VDC / 6Watts)
7.
Power switch
(Note: Turn-on DAC-100 before booting the PC/MAC editing software.)
3 4
.
Normal Mode for DV Cam, MAC OS
Windows ME / XP
Windows 98, Windows 2000
9
5 6 7