Using The Magnetic Stripe Reader; Maintaining The Printer - Intermec PB2 User Manual

Mobile

Hide thumbs Also See for PB2:

Table of Contents

Using the Magnetic Stripe Reader

PB2 Mobile Printer User's Guide

3 Install the battery in the printer and close the battery door. The

printer is now configured for your connection.

If your PB2 includes the optional magnetic stripe reader, follow the

next procedure to read cards.

Note: You need an application running on the host computer to read

data from the card. For more information, see the

Reference

Manual.

PB2 Magnetic Stripe Reader Slot

To use the magnetic stripe reader

1 Position the card so the magnetic stripe faces the paper door.

2 Quickly swipe the card through the reader in either direction. The

Data and Status LED indicates card reading status as described in

"Understanding the LEDs" on page 13.

Cleaning cards for the magnetic stripe reader are available from

Intermec. For information, contact your local Intermec distributor.

To clean the exterior of the printer, use a soft cloth and mild cleaner.

Do not use abrasive cleaner, chemicals, or scouring pads, as these will

damage the finish.

XSim Programmer's

Table of Contents