Using The Magnetic Stripe Reader; Maintaining The Printer - Intermec PB3 User Manual

Using the Magnetic Stripe Reader

Maintaining the Printer

18
If your PB3 includes the optional magnetic stripe reader, follow the
next procedure to read cards.
Note: You need an application running on the host computer to read
data from the card. For more information, see the
Reference Manual.
PB3 Magnetic Stripe Reader Slot
To use the magnetic stripe reader
1 Position the card so the magnetic stripe faces the paper door.
2 Quickly swipe the card through the reader in either direction. The
Data and Status LED indicates card reading status as described in
"Understanding the LEDs" on page 3.
Cleaning cards for the magnetic stripe reader are available from
Intermec. For information, contact your local Intermec distributor.
To clean the exterior of the printer, use a soft cloth and mild cleaner.
Do not use abrasive cleaner, chemicals, or scouring pads, as these will
damage the finish.
XSim Programmer's
PB3 Mobile Printer User's Guide