Device Information; Device Name Settings; Device Clock Settings - Hootoo IP Wireless / Wired Camera User Manual

1）the right interface will indicate
the parameter setting operation is successful, please click OK
then refresh.
2) the right interface will indicate the parameter setting
operation is successful, and need restart to finish
setting, please click OK.
If system indicates to restart (as right photo), please single
click yes (Y) and then enter again.

3.4.1. Device Information

The device
、
（MAC）
device system firmware version, device application firmware version.

3.4.2. Device Name Settings

Here it displays camera name,
refer multiple channels equipments setting etc.

3.4.3. Device Clock Settings

information includes
e.g.
the above interfaces,
: search displayed name on search bar, the following
13
device serial number