Syslog Settings - Buffalo AirStation WZR-1750DHP User Manual

Permit configuration
from wired Internet
Permitted IP address
Permitted Port
Limit network scanning
NTP Functionality
NTP Server
Update Interval
Local Date
Local Time
Time Zone
DST (Daylight Saving
Time)

Syslog Settings

You may transfer the AirStation's logs to a syslog server.
Admin - Syslog Settings
Transfer Logs
Syslog Server
Logs
If enabled, allows access to configuration interface from network devices on the WAN
(Internet) side.
Displayed only if Internet-side configuration is enabled. Enter the IP address of a device
that is permitted to configure the AirStation remotely from the WAN (Internet) side.
Displayed only if Internet-side configuration is enabled. Set a port number (1 - 65535) to
configure the AirStation from the WAN (Internet) side.
If checked, network scanning will not be able to determine which devices have network
settings GUIs available. You will have to open Settings for network devices directly.
Enable to use an NTP server.
Enter the name of the NTP server as a hostname, hostname with domain name, or IP
address. Up to 255 alphanumeric characters, hyphens (-), and underscores (_) may be
used. The default is time.nist.gov.
How often will the AirStation check the NTP server for the correct time? Intervals of 1 -
24 hours may be set. The default is 24 hours.
You may manually set the date of the AirStation's internal clock.
You may manually set the time of the AirStation's internal clock.
Specify the time zone (offset of greenwich mean time) of the AirStation's internal clock.
You may configure the AirStation to automatically use DST (daylight saving time). If
selected, the AirStation will automatically adjust the time at the beginning and end of
DST.
Enable to send logs to a syslog server.
Identify the syslog server by hostname, hostname with domain name, or IP address. You
may enter up to 255 alphanumeric characters and hyphens (-).
Choose which logs will be transferred to the syslog server.
57