Setting Up WebAccess
WebAccess is a cloud service provided by Buffalo that allows you to access your NAS remotely over the Internet. You can
share content with everyone or with specified users. You can set up WebAccess through the settings page of your NAS,
or enable the service on your AirStation.
If you have a BuffaloNAS.com account, you can use its login to use WebAccess. You can also use your DDNS hostname or
an external IP address along with the port used for WebAccess.
WebAccess Settings
1
Make sure the NAS is connected and available, and that the AirStation is powered on and connected.
2
Open the AirStation's Settings page and navigate to Security - UPnP.
3
Enable UPnP and click Apply.
4
Navigate to Applications - Disk Management.
5
Click Setting Changes.
6
Check WebAccess Access Restrictions and click Save.
7
If you need to create a new user for WebAccess, create one on the Disk Management page, under Add User.
8
Click Applications > WebAccess.
9
Check "Enable" for WebAccess.
10
Leave the WebAccess External Port option as "Auto" so that UPnP will automatically configure a port for you.
117