Buffalo AirStation WZR-1750DHP User Manual page 107

Step 2: Connect the Wireless Bridge to the AirStation
1
Set the mode switch on the back of the wireless bridge to "WB".
Confirm that the LEDs appear as below:
Wireless LED: blinks blue
Internet Access LED: off
Router LED: off
Buffalo LED: lit white
Note: If the LEDs do not appear as above, initialize the wireless bridge by holding the reset button down for 3
seconds.
2
Change the PC's IP address to "192.168.11.xxx" (e.g. 192.168.11.135).
3
Connect the wireless bridge to the PC with an Ethernet cable.
4
Open a web browser and enter "192.168.11.100".
5
Enter "admin" for the username and "password" for the password, then click Log In.
107