Buffalo AirStation WZR-1750DHP User Manual page 16

4
Turn on the AirStation, then wait one minute.
Note: If the power does not turn on when the AC adapter is connected, press the Power button on the rear of the
AirStation.
5
If using a wired LAN, connect the AirStation LAN port and computer using a LAN cable.
If using a wireless LAN, connect the computer to the wireless LAN as described in Chapter 3.
6
Once your computer has booted, the AirStation's LEDs should be lit as described below:
Wireless
Internet access
Router
Buffalo
LAN
Internet
Note: If the router LED is not lit, hold down the mode button for about 3 seconds to switch to router mode.
On or blinking
On
On
White light on
On or blinking
On or blinking
16