Saving And Restoring Settings With A Backup File; Save Settings To A Backup File - Buffalo AirStation WZR-1750DHP User Manual

For example, if the original MAC address is "00:24:A5:D5:01:06", change it to "02:24:A5:D5:01:06".Log in to the AirStation's Settings and navigate to Wireless - MAC Filtering. Register the client's MAC address. Use the new MAC address if the second digit had been changed.e.g. If the original MAC address is "00:24:A5:D5:01:06", change it to "02:24:A5:D5:01:06".Open the AirStation's settings and go to Mac filtering page, then register the MAC address you have changed in the procedure 2.

Saving and Restoring Settings with a Backup File

Once you have finished configuring your AirStation to your needs, you can save the current configuration to a backup
file. This file can be used to restore the AirStation's settings when needed. For example, the AirStation will initialize its
settings after a hard reset. Instead of re-configuring the unit, simply use the backup file to restore its previous settings.
The backup file is not automatically updated when you make further AirStation configuration changes.

Save Settings to a Backup File

You can access Save settings by navigating to the Admin - Save/Restore.
1
On the Save/Restore Settings page, check Back up settings.
2
Check Use Password if you want to encrypt the backup file with a password. If you do, the system will ask for
the password when restoring settings with the backup file. The password may include up to 8 single-byte
alphanumeric characters and underscores (_).
3
Click Execute. The Save As dialog appears.
4
Click OK.
Once the file has been saved to your system, do not rename the backup file. If needed, you can put the file into another
folder.
115