Table of Contents
Advertisement
IDE Mode
Serial-ATA Controller 0
This item appears only when SATA Mode item set to [IDE Mode]. Set to
[Enhanced] to support two SATA 6.0 Gb/s and four SATA 3.0 Gb/s devices. Set
to [Compatible] when using Windows 98/NT/2000/MS-DOS. Up to four SATA
devices are supported by controller 0 and two SATA devices are supported by
controller 1 when under these operating systems.
Serial-ATA Controller 1
This item appears only when SATA Mode item to [IDE Mode] is set. Set to
[Enhanced] to support two SATA 3.0 Gb/s devices.
Serial-ATA Controller 1
Set to [AHCI Mode] to have the SATA hard disk drives use the AHCI (Advanced
Host Controller Interface). The AHCI allows the onboard storage driver to
enable advanced Serial ATA features that increases storage performance on
random workloads by allowing the drive to internally optimize the order of com-
mands.
RAID Mode
ASMB-920IR User Manual
46
Advertisement
Table of Contents
