Operating Instructions For Ase7000, Ase9000, Rc17S, Rc17Sd2, Rc22S, Rc22S3, Rc25S, Rc27S, Rc30S; Display And Features - Amana ASE7000 Service Manual

Operating Instructions for ASE7000, ASE9000, RC17S,
RC17SD2, RC17SED, RC22S, RC22S3, RC25S, RC27S, RC30S

Display and Features

There are words in
the display that never
actually display.
The display is used for many
different models of microwaves.
Depending on the model, certain words
or symbols may never be highlighted or
become visible.
RS2240003 Rev. 0
Cooking Display
DISPLAYS
00:00
COOK LEVEL
ITEM
STG
READY
POWER
QTY
Programming Display
DISPLAYS
P
ro9
OP: --
STG
A–2
DESCRIPTION
Displays cooking time. If stage cooking is
programmed, total cooking time is displayed.
COOK LEVEL displays the current microwave
power level. 100% is the highest setting (full power),
and 0% is lowest (no microwave energy used).
ITEM displays the single or double digit entry of a
programmed cooking condition when using a
programmed pad. ITEM also flashes when a
cooking condition can be started or programmed.
STG displays with a single number. This number is
the stage the oven is at in the cooking condition. Up
to four stages can be programmed.
READY displays when oven is ready to use.
POWER displays during active microwave
generation in the oven. POWER will not display
when power setting is at 0; and POWER will turn on
and off when microwave energy is set at less than
100% (full power).
Displays when the Quantity pad has been used.
DESCRIPTION
Displays when oven is in programming mode for
single pad or double pad memory.
Displays when oven is in user option mode. User
options can then be set or specified.
Displays stage number during cooking or when
programming a specific cooking stage. Stage
number (1 through 4) indicates the stage that is
being used.