Amana ASE7000 Service Manual page 44

Operating Instructions for DQ22HSI
Display and Features
Double Pad Programming
This feature enables 100 programmed entries to be
made. Using double pad programming with the menu
option increases the number of entries possible to a
total of 400. Each entry will be assigned a double digit
number, for example 11, 21, or 83. When using the
double pad programming, two pads must be pressed to
start the cooking cycle.
NOTE: Your Dairy Queen
for double pad programming. All the necessary codes, except bulk
heating times for BBQ, are entered. The BBQ heating times will vary
depending on your supplier of BBQ.
Manual Time Entry
In addition to programmable pads, this microwave also accepts
specific time entry by using the TIME ENTRY pad. Using
manual time entry does not affect the programmed buttons.
Quantity Pad
The quantity pad increases the cooking time depending upon
how many items are placed in the oven. The user specifies the
amount of items placed in the oven after entering the product
code. Once pressed QTY will display along with the number of
items in the oven.
Stage Cooking
Stage cooking is a cooking sequence with specific power stage
changes. The user can program up to four different power level
changes and the specific amount of cooking time at each power level. Each
power level/cooking time combination is known as a stage. Up to four stages
can be programmed.
OP:--
User Options
This microwave can be set for specific user preferences.
Options such as beep volume, and the number of programmable pads can
be changed. To change different options, see User Options in this manual.
RS2240003 Rev. 0
® boosting oven is pre-programmed at the factory
in progress, clears out any remaining
time, and also ends a programming
or user option cycle. When the
STOP/RESET pad is used to end a
programming or option change, the
changes are discarded.
to be programmed. By using menu
pads the total number of possible
programs increases from 100 to 400.
Dairy Queen
County Foods
A–8
START Pad
The start pad is
used to begin a
manual time entry
cooking cycle.
STOP/RESET
pad
The STOP/RESET
pad stops a
cooking sequence
MENU Pad
The menu pad
allows four different
menus to be used.
Each menu allows
100 different items
®
is menu 1. Texas
®
is menu 4.