Installing A Sim Card And/Or Memory Card; Installation - Honeywell Dolphin 7800 User Manual

Hardware Maintenance
When needed, clean the image engine window and the LCD display with a clean, non-abrasive, lint-free
cloth. The terminal can be cleaned with a damp cloth. For additional information on hardware mainte-
nance specific to the Dolphin Healthcare Housings,

Installing a SIM Card and/or Memory Card

SIM Card
Short for Subscriber Information Module, a SIM card stores the subscriber's personal information,
GSM/GPRS radio settings, security keys, contacts, etc. SIM cards can be installed in compatible mobile
devices, enabling you to switch devices without losing personal and setup information.
Before installing the SIM card:
• The service provider must activate the SIM card.
• The terminal must be powered down.
Note: If no SIM card is installed, you can still make emergency phone calls (e.g., 9-1-1).
Memory Card
You can expand the terminal's memory capacity by installing and industry-standard microSD or microS-
DHC memory card. Contact a Honeywell sales representative for details on purchasing optional memory
cards for your Dolphin terminal. Format all microSD/SDHC cards before initial use.

Installation

1. Press and hold the Power key
(see page 2-11).
2. Release the hand strap and slide battery latch away from the battery into the unlock position.
3. Wait at least 3 seconds. Slide the battery release button away from the stylus slot, then remove the
battery.
4. Remove the screws and the protective shield covering the SIM/memory card socket.
5. Unlock the SIM card latch by sliding the latch toward the stylus slot.
6. Lift the latch to reveal the SIM socket and the memory card latch.
Note: If a SIM card is installed, remove the card to reveal the memory card latch.
4
3 - 16
see page
for approximately 5 seconds to put the terminal in
5
3-11.
6
Suspend Mode